6
EN
Using the Switch Lock
Using the Switch Lock
Shave
Trimming Long Hair
This function prevents the shaver from being accidentally switched on during
transport. In order to activate/deactivate, press the small button in the center of the
On/Off switch. Then, push the switch to ON, up in the direction of the blade head.
•
During initial use, you may experience temporary redness or irritation of the skin,
since the skin must first get used to this type of shaving. This is normal and
usually lasts between 2 and 4 weeks.
•
Remove the protective cap.
•
Use the on / off switch to switch on the shaver.
•
Hold the shaver at a right angle to the surface of the skin and move it carefully
and in circular motion over your face.
•
At parts of the face that are harder to shave, such as the chin, stretch the skin for
a better result.
•
Shave against the direction of beard growth.
•
After shaving, switch off the shaver and clean the cutting elements carefully.
Use the hair trimmer on the rear of the shaver to shorten beard and sideburns.
1. Take off the protective cap.
2. Push the hair trimmer upward.
3. Use the on / off switch to switch on the shaver.
4. After use, switch off the shaver, push the hair trimmer into its basic position and
clean the shaver.
Remove the wall power supply from the power point before cleaning the shaver.
Never submerge the entire shaver in water.
WARNING!
