WIRELESS SENSORS
This thermostat is compatible with the following AprilAire wireless sensors:
•
Model Z10IDT Indoor Temperature and Humidity Sensor
Up to eight of these sensors can be connected to the thermostat Connected sensors will
automatically be averaged, or individual sensors can be selected for scheduled events
•
Model Z10ODT Outdoor Temperature and Humidity Sensor
One sensor can be connected to the thermostat
The wireless sensor settings can be found under the thermostats’ installer settings See the
sensors instruction manual for mounting and connecting details
THERMOSTAT MOUNTING
1.
Remove the rear mounting plate
from the thermostat
2.
Pull wires through the opening on
the back of the rear mounting plate
3.
Position and level the mounting
plate of the thermostat on wall
and mark the hole locations with a
pencil
4.
Insert and tighten supplied self-
drilling anchors (drywall only)
5.
Place mounting plate over anchors,
insert and tighten screws
6.
Seal wire entry holes to prevent
drafts affecting temperature
readings
90-2563
FIGURE 3
– THERMOSTAT MOUNTING
9
8
