14
1.9 Reset op time:
To reset the all of the operation hours to zero:
Press
(>)
to highlight the line.
Select “
yes
” with
(+)
key.
Press
(<)
repeatedly to return to the main menu.
Caution:
This will erase all previously recorded data (Power, Energy, temperature…)
1.10 Time graph temp:
Adjusts the graphical scale for the Temp vs. Time graphs (adjustable from 1 to 60 minutes).
1.11 Time graph op:
Adjusts the graphical scale for the
Operation h menu
vs. time graphs (adjusts from 1 to 48
hours).
1.12 Calibration of sensors:
On this submenu you can calibrate all the temperature sensors connected to your system.
CAUTION:
Check the temperature with a calibrated thermometer before adjusting.
(Calibration range is from -6°F to +5°F with factory default setting of 0°F)
Calib sensors
------------ -
--- --
Sensor T1 0°F
- -
Sensor T2
0°F
Sensor T3
0°F
Sensor T4
0°F
Sensor T5
0°F
Service
-------- - --- --
Extra
off
External sensor
no
Protection func.
Flow meter
yes
Gallon / impulse 2.6
Factory setting
no
Reset op time
no
-
Service
----------------- ---
External sensor
no
Protection func.
Flow meter
yes
Gallon / impulse
2.6
Factory setting
no
Reset op time
no
Time graph temp
5m
Service
------------------ -
Protection func.
Flow meter
yes
Gallon / impulse
2.6
Factory setting
no
Reset op time
no
Time graph temp
5m
Time graph op
1h
See
Temperature
(section 5)
for
more detailed
information.
See
Operation h
(section 4)
for
detailed
information.
Summary of Contents for Advanced solar controller
Page 1: ...ADVANCED SOLAR CONTROLLER ...
Page 31: ...31 8 Controller Schematic ...
