Problems solving
•
If any sensor is faulty, segment in its position is blinking.
Change faulty sensor as soon as possible, system is not fully functional.
•
If irregular false obstacle indication occurs, it can be one of the following problems:
Frost on sensors
Clean sensors
Sensors are placed too low
Use angle brackets (12) or (25) to tilt axe of sensors upwards
Rear side of some sensor is in contact
Create separation between sensor and vehicle body
with vehicle chassis
•
If any protruding part in the rear of the vehicle causes unwanted obstacle indication (e.g. spare wheel, towing hook…),
increase step by step parameter 11 value from 0 (Factory Setting) until problem is solved.
