APR
- 3651 Walnut Avenue, Chino, CA 91710 • (909) 664-9980 • Website:
TB-10010
Page 4 of 5
© 2020 DESCO INDUSTRIES INC
Employee Owned
Figure 12. Tightening the quick knob on the camera
articulating arm to lock the auto-focus camera into
overhead orientation
Figure 13. Adjusting the macro lens while the auto-focus
camera is in overhead orientation
3. Use the wireless mouse to navigate through the
camera's embedded software and control its
auto-focus, photo, and video features.
Overhead Rework Inspection
1. Use the quick knob on the camera articulating arm
to position the auto-focus camera in an overhead
orientation. Loosen the knob to free the arm's
movement, and tighten the knob to lock the arm in
place.
2. Adjust the macro lens and LED ring light until the
desired results are achieved on the LCD monitor.
3. Use the wireless mouse to navigate through the
camera's embedded software and control its
auto-focus, photo, and video features.
Specifications
Auto-Focus Camera
Input Voltage and
Frequency
(External Adapter)
AC/DC Power Adapter
Power Input:
100-240 VAC, 50/60 Hz
Power Output:
12 VDC @ 1.50 A
Cable Length:
5 ft. (1.5 m)
Image Sensor
1/2.86 inch Panasonic Full HD
2.0MP
Effective Pixels
1920 x 1080
Frame Rate
60 fps
Definition
More than 1200 lines
Housing
Aluminum
White Balance
Automatic, Manual, Continuous
Brightness Control
Automatic, Manual, Continuous
Color
R/G/B adjustable
Edge Enhancement Yes
OSD
Yes (HDMI mode)
Edge Enhancements Yes
Freeze Image
Yes
HDR
Yes
Crosshair
Multi-color, small, or large
Horizontal & Vertical
Lines
Multi-color, two lines for each
Noise Reduction
Supported
SD card slot
Supports up to 32 GB
HDMI Port
1080p
USB Port
USB 2.0
Dimensions
3.1" x 2.8" x 3.6"
(78 mm x 70 mm x 92 mm)
Weight
1.2 lbs (0.5 kg)
