APR TB-10010, User Manual

Page: 3 / 5

APR - 3651 Walnut Avenue, Chino, CA 91710 • (909) 664-9980 • Website: APR-Rework.com
TB-10010 Page 3 of 5
© 2020 DESCO INDUSTRIES INC
Employee Owned
7. Use the mounting clip located at the back of the
LCD monitor to secure it to the opposite end of the
monitor articulating arm.
Figure 8. Securing the LCD monitor to the monitor
articulating arm
8. Connect the HDMI cable to the HDMI port located
on the bottom of the LCD monitor. Connect the
opposite end of the cable to the HDMI port located
on the back of the auto-focus camera.
9. Insert the SD card and the wireless mouse's USB
transmitter into their appropriate connectors located
on the back of the auto-focus camera.
10. Secure the LED light ring onto the macro lens using
its three thumbscrews. Connect its power cord into
an AC outlet. Enable the power switch on the LED
light ring.
NOTE: The LED light ring is rated to accept 100-240
VAC and includes a NEMA 5-15p power plug. A
plug adapter must be sourced and used if the LED
light ring is to be used in a region without a NEMA
5-15 outlet.
11. Connect one of the two included power adapters
to the power jack located on the bottom of the LCD
monitor. Connect the opposite end to an AC outlet.
Enable the power switch on the LCD monitor.
12. Connect the second power adapters to the power
jack located on the back of the auto-focus camera.
Connect the opposite end to an AC outlet. Enable
the power switch on the auto-focus camera.
Operation
Side-View Reflow Inspection
1. Use the quick knob on the camera articulating arm
to position the auto-focus camera in a side-view
orientation. Loosen the knob to free the arm's
movement, and tighten the knob to lock the arm in
place.
Figure 9. Scorpion Auto-Focus Camera installed on the
Scorpion Rework System
Figure 10. Tightening the quick knob on the camera
articulating arm to lock the auto-focus camera into side-
view orientation
2. Adjust the macro lens and LED ring light until the
desired results are achieved on the LCD monitor.
Figure 11. Adjusting the macro lens while the auto-focus
camera is in side-view orientation