User's Manual
List view: quick way to establish complex routings
Each routing can be entered as text line, in the form
"
Source > Sink
"
or
alternatively "
Sink < Source
" (both produce identical results).
"Sink" and "Source" can be entire interfaces, channel ranges or single channels.
Entire interfaces are be specified as two-letter abbreviation (i.e. "
MO
" for MADI
optical)
Channel ranges can be specified by appending a colon, followed by the start
and end channels.. For example, Dante channel 9 to 16 would read "
DA:9-16
"
Single channels are specified by appending a single the channel number to an
interface, separated by a colon. For example, AES50 channel 24 would read
"
AE:24
"
Example 1: to route all channels from AES50 to MADI coaxial, enter
"
AE > MC
" (or alternatively, "
MC < AE
")
Example 2: to route channels Dante 56-64 to ADAT channels 1-8, enter
"
DA:56-64 > AD:1-8"
(or alternatively, "
AD:1-8 < DA:56-64
")
Example 3: to route MADI TP channel 2 to Extension chann1l 1:
"
MT:2 > EX:1
" (or alternatively, "
EX:1 < MT:2
")
24
