User's Manual
4.2.
Preset Store
▶ Front panel,
Front panel
To store a preset:
Push the
Store
button in the “Preset” menu.
Select the desired storage location
☼
1
to
☼
12
by turning the encoder left or
right.
Confirm the selected location by pushing the encoder, or push the
⮌
Back
button to cancel the operation.
▶ Front panel,
Web
Select "PRESET / Store" menu to store the preset as current preset number, or
▼" menu, choose the desired preset number. An asterisk next
select "PRESET / Store as..." to choose a different number.
▼" menu, choose the desired preset number. An asterisk next
Note: You can also download presets to a file. This is useful when transferring
setups between different multiverters.
▶ Front panel,
Command line
preset store [<num>]
4.3.
Changed presets
▶ Front panel,
Front panel
When a preset is recalled, the corresponding location
☼
1
to
☼
12
is lit green.
If any setting is changed afterwards (except for headphones level), the LED turns
red to indicate that the current setting differs from the recalled preset. If you want
your changes to be reflected also in the stored preset, just store the preset again.
Otherwise, the changes are overwritten
the next time a preset is recalled.
▶ Front panel,
Web
A changed preset is indicated by an asterisk (*) next to the preset number.
Use "PRESET / Store" to permanently store changes into that preset.
▼" menu, choose the desired preset number. An asterisk next
▶ Front panel,
Command line
A changed preset is indicated by an asterisk (*) next to the preset number.
The current preset can be queried by calling
preset
without parameters.
20
