Device Management
Charge
It is vital to fully charge for first use and complete charge and discharge
during use to extend the life of the device.
1. Connect the supplied AC power cord from the AC input of the APPRAVE
and an electrical outlet in your home.
2. The charge indicator lights up in red while charging and turns off when
fully charged.
ON/OFF
Press and hold the ON / OFF button to turn on and off your device.
Bluetooth mode
1. Turn on APPRAVE
2. Press the Mode button until the display shows the word “BT”.
3. The Bluetooth LED will start blinking.
Pairing with your Bluetooth APPRAVE (Smartphone) device.
1. Repeat the steps above.
2. Go to Bluetooth settings on your Smartphone, and search for Bluetooth
devices.
3. A new device called APPRAVE will appear in the list of Bluetooth devices
found,
4. Select APPRAVE and proceed with the pairing.
5. If required password, enter four zeros 0000.
6. Once paired the Bluetooth LED will remain fixed.
