Approx appLS15I, Setting Manual

Page: 4 / 102

1D Barcode Scanner Setting Manual
V1.10
Chapter1 System Settings
Introduction
The user can set the function of the barcode reader by scanning one or more setting
barcodes。
Scanning Instructions
In the Trigger Mode, the scanning barcode operation steps are as follows
1. Hold down the trigger key of the barcode reader, the line of sight is activated, red red
line of sight appears。
2. Align the red line of sight with the bar code center, move the bar code reader and adjust
the distance between it and the bar code to find the best reading distance。
3. After hearing the successful prompt sound, and the red lighting line is extinguished, the
reading is successful, and the barcode reader transmits the decoded data to the host.。
Note: During the reading process, you will find the distance between the barcode
reader and the barcode within a certain range for the barcode of the same batch, and
the reading success rate will be very high. This distance is the best reading distance.
4
/
102