Approx appLS15I, Setting Manual

Page: 24 / 102

1D Barcode Scanner Setting Manual
V1.10
Chapter3 Data Editing
Introduction
After the barcode scanner is successfully decoded, the device will get a series of data,
which can be numbers, English, symbols, etc. In application, we may not only need the
barcode data information, or the barcode contains data information can not meet your
requirement.
For example, you may want to know which type of barcode you get from this string of data
information or attach special data to the string data, which may not be included in the
barcode data information.
Increasing these contents while making code, it is bound to increase the length of the
barcode and the flexibility is not enough. It is not a good way.
At this moment, we think of artificially adding some contents before or after the barcode
data information, and these added contents can be changed in real time according to the
demand, and can be selectively added or masked. This is the prefix and suffix of barcode
data information.
The method of adding prefixes and suffixes , can meet the requirement and need to
modify the contents of the barcode information.
Note: Data editing format: <customize prefix> <barcode data> <customize suffix>
<suffix data>
24
/
102