94
4. Connecting the IP Video Server: please take the following steps:
Step 1:
Insert one end of a Cat 5 Ethernet RJ-45 cable into the “LIN IN” port of the Power over Ethernet
Injector. Connect the other end of the cable to your network switch or PC.
Step 2:
Plug one end of the Power adapter into the “POWER IN” port of the Power over Ethernet Injector
and the other end into your electrical outlet.
The installed connection looks the same as in Figure 1.
Figure
1
Step 3:
Connect another Cat 5 Ethernet RJ-45 cable from the Power over Ethernet Injector
“POWER+DATA OUT” port to the “POWER+DATA IN” port of the IP Video Server.
The installed connection looks the same as in Figure 2 and Figure 3.
Figure 2
Figure 3
Step 4:
The ”Act indicator” of the IP Video Server should light up.
Summary of Contents for VS-2311BE
Page 2: ......
Page 93: ...91 Figure 6 ...
