4.3 Brief Overview of the Setup Mode
Click
to enter to the Setup mode. The Setup mode is composed of the following pages:
I. Network Setup – 01. Network Setup
Function buttons
Description
Static IP
Click to activate the function. When only one unit of the NVR is
connected to LAN, you can freely assign an IP address for the NVR.
When setting the DHCP item to off, the IP
Address, Subnet Mask,
Gateway and DNS may be manually edited.
DNS
(The Domain Name System) is an Internet service that translates domain
names into IP addresses (e.g., 192.168.0.20). The address can be
obtained from your ISP or network gateway.
Enable DHCP Server
Checkmark to activate the function. This option enables or disables the
DHCP communication function. If provided with a DHCP server, the NVR
can get an IP automatically by setting the DHCP item to on.
Enable PPPoE
Checkmark to activate the function. If you use the camera to connect
directly to the Internet, you will need to enter the username and
password, which were given to you when you set up your account
(username and password) with your Internet Service Provider. If the
camera is behind a router or a gateway, you do not need to configure this
setting.
14
