21
4.2.4 Motion Detection
Take the steps detailed below to activate a programmed motion detection. For MOTION
SETTING, as well as its two distinct functions of MOTION ENABLE and SENSITIVITY / REGION,
please refer to section 5.4 for further details.
(1) Press the
Setup
button
to enter the
MAIN MENU
.
(2) Select the item termed "
LAN CAMERA
" and press the
Enter
button
to enter the
LANCAM SETTING
page.
(3) Select the item termed "
MOTION
" and push the
Enter
button
to enter the
MOTION
SETTING
page.
(4) To activate the motion detection function, set "
MOTION ENABLE
" to "
ON
". To deactivate the
function, set "
MOTION ENABLE
" to "
OFF
" The items termed "
OFF
" and "
ON
" switch all the
channels in the
MOTION ENABLE SETTING
page off and on respectively as well. If you wish
to select individual channels for viewing, select the item termed "
SET
" and activates your
desired channels by pressing them "
ON
" while turning the rest "
OFF
". Confirm your choices
by pressing "
OK
". If not, push "
CANCEL
".
(5) In the
MOTION SETTING
page, select the entry termed "
SENSITIVITY / REGION
" and press
the “>” button
to show all the channels in their order, each in turn. Use the “
^
” button
and the “v” button
to select a desired channel for setting. Press the
Enter
button
and
set the channel in the
SENSITIVITY / REGION SETTING
page. Repeat the process for all
other channels you choose.
(6) To set "
SENSITIVITY
" and "
REGION
" for activation on the
SENSITIVITY / REGION
page,
choose your degree of sensitivity and then push the
Enter
button
. At once the legends
"
OK
" and "
CANCEL
" appear at the bottom of the page. Now press the “<” button
and the
“>” button
to confirm either "
OK
" or "
CANCEL
" respectively.
Summary of Contents for NVR-2018
Page 2: ......
