Appro NVR-2018 Installation & Operating Manual Download Page 11

Page: 11 / 87

2.2 Rear View

SD Card

RS-232

ALARM

DC12V

MONITOR

AUDIO

ETHERNET

I/O

26 27

28 29

31 32 33

ETHERNET 10/100

Connector

This is one standard RJ-45 connector for 10/100 Mbps Ethernet

networks.

SD CARD

Slot

This is used for system software updating and archiving/accessing critical images.

RS-232

Port

The RS-232 communication port functions as a connector to an external control device.

Please refer to

RS-232 Protocol

for more details.

MONITOR

Connector

The connector provides the unit’s composite video live signal if connected to a

display device.

AUDIO

OUT:

This provides the unit’s audio signal to a speaker.

ALARM I/O:

This is a 9-PIN D-SUB connector including

GROUND, ALARM OUT, DISK FULL,

and

RECORD IN

for connecting with external devices. Please refer to the next section for details.

Wire Catch:

The wire catch secures the power cord and keeps it in place (so that it does not droop or

hang loosely).

Ground Screw’s:

The ground screw is for chassis terminal.

Plug Inlet:

The inlet connects to an external power supply. Connect 12 V DC UL Listed Class 2 Power

Supply.

Summary of Contents for NVR-2018
























































































Search results

Summary of Contents for NVR-2018

Reviews:

Related manuals for NVR-2018

Brands by name

Popular brands

Appro NVR-2018, Installation & Operating Manual

Search results

Summary of Contents for NVR-2018

Reviews:

Related manuals for NVR-2018

Brands by name

Popular brands