4
Important Safety Instructions
Please read this manual carefully before using this equipment and keep it for future reference.
The device shall be installed, operated and maintained by a qualified professional authorized by the
company.
All warnings listed on this projector and listed in this manual should be observed.
Strictly observe all instructions on operations and usage.
Strictly observe all local installation standards.
This device complies with international safety standards IEC60950-1, EN60950-1, UL60950-1, CAN/CSA
C22.2 No.60950-1 and domestic safety standards GB4943.1. These standards are safety standards for
information technology equipment that are subject to stringent requirements for the use of critical safety
components, components, materials and insulators in order to protect the user and operator from the
following hazards:
- Electric shock
- Energy-related hazards
- Fire
- Heat-related hazards
- Mechanical hazards
- Radiation
- Chemical hazards
In addition, these standards also raise limitations in many ways, such as internal and external temperature
rise levels, radiation levels, mechanical stability and intensity, peripheral construction and fire protection
devices. Even if the normal operation of the equipment fails, the single-point fault simulation test can also
ensure that the device can use the fuse, thermal circuit breakers, overcurrent protection devices and similar
devices to provide adequate protection of the human body.
This manual is for authorized users only for professional purposes and these persons should be familiar with
the potential hazards that may arise from this product. Only qualified maintenance personnel who are familiar
with such hazards can open the product shell to perform maintenance operations.
Caution: The user is cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
General Safety Instructions
Security Tips
FCC Statement