16
Installation
Removing the Lens
Installing the Lens
Before replacing the lens, adjust the lens to the
center.
As shown in the figure, press the lens lock
switch on the top cover, and rotate the lens
counterclockwise for about 30º.
Hold the lens, and move forward to take out the
lens.
Align the lens structure to lock the lens.
Rotate the lens clockwise until you hear a "click"
sound, indicating that the lens is aligned.
At this time, the lens is installed.
- Before removing or installing the lens, shut down the projector.
- When removing or installing the lens, do not touch the lens surface.
- Do not leave fingerprints, dust or oil on the lens surface.
Caution