Appostar KP-5370, User Manual

Page: 54 / 63

BIOS SETUP
50 KP-5370 Touch POS Terminal
Quick Boot
Allow BIOS to skip certain tests while booting.
Options available: Enabled/Disabled. Default setting is Enabled.
Bootup NumLock
Allows you to select power-on state for NumLock function.
Options available: On/Off. Default setting is On.
Wait for 'F1' If Error
The BIOS feature controls the system's response when an error is detected
during the boot sequence.
When enabled, the BIOS will halt the oot sequence when an error is detected.
You will need to press the F1 button at this point. It brings you to the BIOS
setup menu where you can adjust the settings to fix the problem.
Options available: Enabled/Disabled. Default setting is Enabled.
Hit 'DEL' Message Display
This feature allows you to control the display of the Hit 'DEL' to enter Setup
message during memory initialization.
When enabled, the Hit 'DEL' to enter Setup message will appear during
memory initialization.
However, if you enable the QuietBoot feature, the message will not be
displayed. So, if you want the message to appear, you will have to disable
Quiet Boot as well.
Options available: Enabled/Disabled. Default setting is Enabled.
Boot Device Priority
This field determines which type of device the system attempt to boot from
after BIOS Post completed.
Specifies the boot sequence from the available devices. If the first device is not
a bootable device, the system will seek for next available device.