Installation
General Use
F.A.Q.
Warranty
Troubleshooting
Appendix
Safety
V2.1 [2013-1-14]
13
9505 / 9505A Docking Station
If you are using SmartDial and want to override it temporarily, one extra step is needed:
1. Lift the receiver to go off-hook.
2. Enter 0 (zero) to leave SmartDial.
3. Enter 0 0 (zero, zero).
4. Enter the country code.
5. Enter the area code and telephone number.
6. Enter # to
place call
.
Temporarily Overriding SmartDial
With SmartDial off, dialing United States 911 is not disabled, but you must still enter # to send the number and make the
connection. To clarify: without SmartDial, you must enter 911# to reach emergency services.
911 Emergency Calls without SmartDial
The Docking Station has a built-in ringer to alert you to an incoming call. Your handset probably also has a ringer, so you
may wish to turn it off. The Docking Station has an internal ringer that can be silenced by pressing *52.
When a call comes in, simply use your handset like you normally would. Speak in a regular tone of voice. You should
find most of your calls are at least as clear as a cellular phone call and often as clear as a standard wire-line phone call.
The only minor difference in receiving a Docking Station call is this: when the caller at the other end disconnects, if you
continue to hold your receiver off-hook you will get a dial tone. Be sure to hang up your handset normally.
Answering a Call
General Use
