4
Si2035 Hardware Manual
920-0108B
1/26/2018
Block Diagram
Introduction
Thank you for selecting an Applied Motion Products motor control. We hope our dedication to performance, quality
and economy will make your motion control project successful.
If there’s anything we can do to improve our products or help you use them better, please call or fax. We’d like to
hear from you, our phone number is (800) 525-1609. You can also email [email protected].
Si2035 Features
• Programmable step motor driver in complete fully featured package
• Built-in 30 volt DC power supply.
• Drive connects to a 120 or 240 Volt AC input, single phase, 50/60 Hz
• 8 optically isolated digital inputs for connecting end of travel limits, sensors, etc.
• 4 optically isolated programmable outputs for coordinating external equipment
• Motor current from 0.2 to 2.0 amps/phase
• 0-5V analog input (currently supported by SCL only)
• microstepping to 50,800 steps per revolution.
• Powerful, flexible, easy to use indexer.
• Connects by a simple cable to your PC for programming (cable included).
• Microsoft Windows
TM
-based software for easy setup and programming
• In Si™ mode, operates stand alone, running internally stored programs
• In SCL mode, accepts real time commands and queries from a host PC or PLC
• Compact 1.75 x 6.8 x 4 inch overall dimensions.
• Optional man machine interface (MMI) allows operator to enter distances,
speeds, cycle counts and more.
IN1
IN2
IN3
IN4
IN5/CWJOG
IN6/CCWJOG
IN7/CWLIM
IN8/CCWLIM
to PC or MMI
OUT1
OUT2
OUT3
OUT4
Si™
Controller
120/240 VAC
Status LED
STEP MOTOR
Internal
Logic
Supply
RS-232
AC Input
Power
Converter
Optical
Isolation
PWM
Power
Amplifier
Optical
Isolation
