13
Si2035 Hardware Manual
920-0108B
1/26/2018
Programmable Outputs
The Si2035 has four programmable outputs.
These optically isolated, photodarlington outputs can be used to drive
LEDs, relays and the inputs of other electronic devices like PLCs and
counters. On the IN/OUT connector outputs, both the “+” (collector) and
“-” (emitter) terminals of each transistor are available on the connector
pins. This allows you to configure each output for current sourcing or
sinking.
Diagrams of each type of connection follow.
Do not connect the outputs to more than 30VDC.
The current through each output terminal must not exceed 100
mA.
