Applied Biosystems 3500 User Manual Download Page 203

Page: 203 / 326

Create audit reason settings

You can create, modify and delete the reasons that are available for selection in the

Audit Reason dialog box (displayed when a user performs an audited action).

To require users to select a pre-defined reason in the Audit Reason dialog box

(displayed when a user performs an audited action), select the Select a reason

from the list for your change checkbox. Users are not permitted to enter a

reason.

As needed, click

Create, or select a reason, then click Edit or Delete.

Chapter 8

Use Security, Audit, and E-Sig functions (SAE Module)

Administrators

3500/3500xL Genetic Analyzer User Guide—Data Collection Software v3.1

203

Summary of Contents for 3500







































































































































































































































































































































Search results

Summary of Contents for 3500

Reviews:

Related manuals for 3500

Brands by name

Popular brands

Applied Biosystems 3500, User Manual

Search results

Summary of Contents for 3500

Reviews:

Related manuals for 3500

Brands by name

Popular brands