5
2.0 INSTALLATION
CAUTION
The equipment installation shall conform with local building codes, or in the absence
of local codes in accordance with the Installation Code for Gas Burning Appliances
and Equipment,
CAN1-B149 in Canada
or
Z223.1 in USA
, and applicable
Provincial/State Regulations; which should be carefully followed in all cases.
Authorities having jurisdiction should be consulted before installations are made.
Installation may be in accordance with applicable standards including;
Installation Code for
Natural Gas Burning Appliances and Equipment, CAN1-B149.1
Installation Code for
Propane Burning Appliances and Equipment, CAN1-B149.2
Installation Code for USA
National Fuel Gas Code, Z223.1
Standard on
Aircraft Hangars, ANSI/NFPA 409
Standard for
Parking Structures, ANSI/NFPA 88A
Standard for
Repair Garages, ANSI/NFPA88B
Safety First: Ensure that all practices of the Construction Safety Association and
O.S.H.A. as well as practical common sense are continuously in use.
2.1 Receiving and Storing
1. INSPECT the duct furnace carefully upon arrival for any shipping damage. If damaged,
sign the carrier’s bill of lading with a notation “Damaged During Shipment” or ”Received
Damaged.”
2. Check the packing slip against all items received. If any items are missing, sign the
carrier’s bill of lading with the notation “Shipment Received Less Item …….”
3. When unloading the duct furnace follow the 2.2 Handling and Suspension section
following.
4. All control components and accessories that are shipped separately for field installation
should be stored in a locked storage area.
5. If the duct furnace and/or its accessories cannot be installed immediately, it should be
stored in a dry and clean area. If this is not possible and the duct furnace must be
stored outside, it should be protected from the weather with tarpaulins or plastic
coverings.
2.2 Lifting and Handling
1. Before the duct furnace is placed in its installed location, check that the hoisting
equipment and permanent supports are adequate for the weight as indicated on the
General Arrangement Drawing plus a weight allowance for servicemen and equipment.
