13
The brown wire must be connected to the terminal marked “L”
(live), or coloured red.
The green/yellow wire must be connected to the terminal
marked “E” or“
”.
Before beginning installation
Check that the product purchased is of a suitable size for the chosen
installation area. In addition, check whether there is an electrical socket
available that will be accessible once the rangehood is mounted. If the product
is going to be used in extraction mode, then there should also be space to
connect a ducting hose to the outside.
Carry out all necessary masonry work prior to the fitting of the rangehood.
Ensure that all electrical connections are carried out by a suitably qualified
person.
Before commencing installation of the rangehood the grease filters should be
removed.
Check inside the product and ensure that there is no transit packaging or any
other materials, such as packets of screws, guarantees etc. These should be
removed and kept for future use.
If possible, disconnect and move freestanding or slot-in cookers from their
position, to provide easier access to the rear wall and ceiling. If this is not
possible then a thick, protective covering should be placed over the worktop,
cooktop or cooker. This will help to protect these surfaces from damage and
debris.
Select a flat surface for assembling the rangehood. Cover that surface with a
protective covering and place all rangehood parts and fittings on it.
Do not tile, grout or silicone this appliance to the wall or cabinetry. This
appliance is designed to be surface mounted only.
