16
17
3. Press appropriate fabric temperature selector pushbutton to select appropriate
setting (between 5 and 7) for your fabric.
4. Hold the iron close to, but not touching, the fabric.
5. Pull the fabric tight in your free hand and pump the surge-of-
steam button as you move the iron over the fabric
(J)
.
Important:
Always stand the iron on its heel rest when
powered on but not in use.
using spray
Use to dampen tough wrinkles at any setting
(K)
.
1. Be sure the iron is filled with water.
2. On first use, pump the spray button
several times.
ironing without steam
Note:
You can use the Steam On/Off button to turn off the steam
function in all settings (1-7).
1. Select setting 1, 2, 3 or 4 to iron without steam
(L)
. The Smart
Steam™ system will automatically turn off and there will not
be any steam generated.
2. To dry iron at higher settings, empty the water from the
reservoir to prevent steaming.
3. Plug in the iron, wait until iron beeps and digital display shows
selected setting. If the steam symbol is flashing, press the
Steam On/Off button to turn off the steam function.
Tip:
The steam symbol becomes steady, indicating the steam function is off.
empyting water tank (optional)
Note:
It is not necessary to empty the water after each use.
1. Unplug the iron and let it cool.
2. To release the water, hold the iron over a sink with the
tip pointing down. Water will empty out of the water-fill
opening
(M)
.
special features
language settings
Your iron has a multilingual digital display that lets you select
from English, French and Spanish.
to change the language (N):
1. Press and hold the (-) button for 2 seconds; the digital display
shows EN (for English).
2. Press the (-) button again, the display changes to FR (for
French).
3. Press the (-) button one more time and the digital display
changes to ES (Spanish).
M
AX
A
U
TO
C
LE
A
N
J
MA
X
AUTO CLEAN
K
L
M
N
Note:
The languages will change in the order listed above.
4. To select the displayed language, press the (+) button or wait 3 seconds after the
language is displayed.
3-way automatic shutoff
The automatic shutoff feature in your iron works as follows:
• The iron will shut off after 30 seconds of inactivity if left on its
soleplate or tipped over on its side. If left vertically on its heel
rest, it will shut off after 8 minutes of inactivity
(P)
.
• The unit beeps once and the AUTO OFF symbol
flashes
on the digital display to let you know the iron has stopped
heating
(Q)
.
• After a few seconds, the digital display light goes off.
• If you pick up the iron, an internal motion-sensitive detector
is activated and the iron starts heating again.
Tip:
You might have to move the iron or shake it gently.
• The unit beeps once, the digital display light comes on and
the set temperature is displayed again.
Note:
Wait for iron to reheat completely before resuming
operation.
anti-drip system
The anti-drip system prevents water spotting at low temperatures.
AUTO CLEAN® System
Note:
If the auto-clean symbol appears on the digital display, the unit needs cleaning.
Follow the procedure under AUTO CLEAN® System.
care and cleaning
This product contains no user-serviceable parts. Refer service to qualified service
personnel.
cleaning outside surfaces
1. Make sure iron is unplugged and has cooled completely. Wipe the soleplate
and outer surfaces with a soft cloth dampened with water. Add mild household
detergent. Never use abrasives, heavy-duty cleansers, vinegar or scouring pads that
may scratch or discolor the iron.
2. After cleaning, steam iron over an old cloth to remove any residue from the
steam vents.
AUTO CLEAN® System
To keep the steam vents free of any buildup, about once a month follow these
instructions.
1. Fill the water tank well below the MAX line. Plug in the iron.
2. Select fabric temperature setting 6 and stand the iron on its heel rest.
3. Wait for the iron to beep and display temperature number with corresponding
fabric.
P
8 minutes
30 seconds
Q
