Appleton • 1.800.621.1506 • www.appletonelec.com
650457-000 Rev. E 05/13 • Page 4 of 8
Wall (KPWB-75, KPWB-100)
Mounting:
1.
Bolt the wall hood to a structural member.
2.
Remove unused conduit plugs and reinstall with tlc-3 grease applied in approximately three equal lines, spaced equally apart on
the conduit plugs.
CONDUIT ENTRY (5x)
25° Stanchion (KPS-125, KPS-150)
Mounting:
1.
Apply tlc-3 grease in approximately three equal lines, spaced equally apart on the conduit stem. thread the stanchion hood onto
the 1-1/4 inch or 1-1/2 inch conduit stem.
NOTE:
five full threads must be engaged.
2.
determine the orientation and tighten the set screw.
SET SCREW
90° Stanchion (KPST-125, KPST-150)
Mounting:
1.
Apply tlc-3 grease in approximately three equal lines, spaced equally apart on the conduit stem. thread the stanchion hood onto
the 1-1/4 inch or 1-1/2 inch conduit stem.
NOTE:
five full threads must be engaged.
2.
determine the orientation and tighten the set screw.
SET SCREW
