27
[SETUP] Page
Figure 5-2 To input nominal by touch screen
Step 1
Press [Keypad Input] key
Step 2
Input the nominal value by touch the screen button
Step 3
Select the unit for the nominal value
Tips
Touch Screen is still available even it is turned off in system
setting.
Input nominal value by measurement
Step 1
Press [MEAS INPUT] soft key
Step 2
Plug a standard component
Step 3
Press [OK] to start the test, the result will be set as nominal
value
5.1.4
Input Tolerance Value [TOL]
Press 1%, 5%,10% and 20% as tolerance.
Press KEYPAD INPUT key to input tolerance value (%).
USB Command: COMP:TOL <Percentage>
Procedure to input tolerance
Step 1
Press [SETUP] key to enter <SETUP> page
Step 2
Select [TOL] field
Step 3
KEYPAD
INPUT
Use touch screen virtual keypad to input
1%
Set 1%
5%
Set 5%
10%
Set 10%
20%
Set 20%