44
AT516/AT516L User's Guide
RET> +1.20,BIN00
//OPEN or OVERLOAD
Note
This command can be used ONLY in BUS trigger mode.
9.10
FETCh
Subsystem
The FETCh subsystem command group is a sensor-only command which retrieves the
measurement data taken by measurement(s) initiated by a trigger, and places the data
into the output buffer.
Figure 9‐6
FETCh Subsystem Command Tree
FETCh?
9.10.1
FETCh?
The FETCh? retrieves the latest measurement data and comparator result.
Query Syntax
FETCh?
Query Response
<float>,<comparator result>
Example
SEND> FETC?
<NL>
RET> +1.00000e-05,BIN01
<NL>
9.11
CORRection
Subsystem
The CORRection subsystem command group to execute the short-circuit clear zero
correction function.
Figure 9‐7
CORRection Subsystem Command Tree
CORRect
:SHORt
9.11.1
CORRection:SHORt
The CORRection:SHORt command execute the short-circuit clear zero for all ranges.
Command Syntax
CORRection:SHORt
Example
SEND> CORRection:SHOR
<NL>
RET> Short Clear Zero Start.
<NL>
RET> PASS
<NL>
Note
Before sending this command, please short circuit the terminals.
Please refer to page 21 section 5.2
Short-circuit Clear Zer
9.12
SYSTem
subsystem
Figure 9‐8
SYSTem
SYSTem
:SENDmode
{FETCH,AUTO}
9.12.1
SYSTem:SENDmode
SYST:SEND command sets the RS-232 Result Send Mode.
Please refer to Page.29 Section 6.1.6 RS-232 Result Send Mode [RESULT SEND]
Command Syntax
SYSTe
m:SENDmode {FETCH,AUTO}
