Applanix LVX User Manual Download Page 24 | Manualshive

Page: 24 / 82

background image

18

THE INFORMATION CONTAINED HEREIN IS PROPRIETARY TO APPLANIX CORPORATION. RELEASE TO THIRD PARTIES OF THIS PUBLICATION OR OF
INFORMATION CONTAINED HEREIN IS PROHIBITED WITHOUT THE PRIOR WRITTEN CONSENT OF APPLANIX CORPORATION. APPLANIX RESERVES THE
RIGHT TO CHANGE THE SPECIFICATIONS AND INFORMATION IN THIS DOCUMENT WITHOUT NOTICE. A RECORD OF THE CHANGES MADE TO THIS
DOCUMENT IS CONTAINED IN THE REVISION HISTORY SHEET. COPYRIGHT © APPLANIX CORPORATION, 2021ALL RIGHTS RESERVED. NO PART OF
THIS PUBLICATION MAY BE REPRODUCED, STORED IN A RETRIEVAL SYSTEM OR TRANSMITTED IN ANY FORM OR BY ANY MEANS WITHOUT THE
PRIOR WRITTEN CONSENT OF APPLANIX CORPORATION.

Figure 18: Welcome Screen

Note: the receiver type for the LVX product appears as APX-18

LV

indicating the

system has been set up for Land Vehicle applications.

4.2.

Web User Interface Layout

The top right corner will display the System name (user definable), Serial Number and
flag that represents the language. The default language can be changed by mouse clicking
on the flag and choosing a flag associated with the desired language.

Clicking on the Applanix logo will bring the “Welcome Screen” back on the browser.

Figure 19: Language Selection

The main system many will appear by default on the left side of the browser. Please see
Figure 20.

«
...
22
23
24
25
26
...
»

Summary of Contents for LVX



















































































Reviews:

No comments

Related manuals for LVX

Brand: KVH Industries Pages: 47

Brand: Trango Systems Pages: 2

Brand: KVH Industries Pages: 13

Brand: King-Dome Pages: 40

Brand: Williams Sound Pages: 2

Brand: Williams Sound Pages: 4

Brand: Linksys Pages: 24

TRAV'LER DIRECTV SK-SWM3

Brand: Winegard Pages: 12

KINGSAT Maritime VSAT P8

Brand: EARDATEK Pages: 88

Brand: SteppIR Pages: 18

Brand: SteppIR Pages: 56

Brand: RFS Pages: 8

Brand: Microwave Radio Communications Pages: 6

Brand: Teltonika Pages: 96

Brand: Ubiquiti Pages: 10

Brand: Oricom Pages: 2

Wireless Edge MT-466009/N

Brand: MTI Pages: 3

Brand: Taco Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands