10
THE INFORMATION CONTAINED HEREIN IS PROPRIETARY TO APPLANIX CORPORATION. RELEASE TO THIRD PARTIES OF THIS PUBLICATION OR OF
INFORMATION CONTAINED HEREIN IS PROHIBITED WITHOUT THE PRIOR WRITTEN CONSENT OF APPLANIX CORPORATION. APPLANIX RESERVES THE
RIGHT TO CHANGE THE SPECIFICATIONS AND INFORMATION IN THIS DOCUMENT WITHOUT NOTICE. A RECORD OF THE CHANGES MADE TO THIS
DOCUMENT IS CONTAINED IN THE REVISION HISTORY SHEET. COPYRIGHT © APPLANIX CORPORATION, 2021ALL RIGHTS RESERVED. NO PART OF
THIS PUBLICATION MAY BE REPRODUCED, STORED IN A RETRIEVAL SYSTEM OR TRANSMITTED IN ANY FORM OR BY ANY MEANS WITHOUT THE
PRIOR WRITTEN CONSENT OF APPLANIX CORPORATION.
Figure 9: Attach Permanent DMI Restraint Bracket to Vehicle Fender
3.2.4.
Install DMI Cable
Use tie-wraps to secure the DMI power and data cable along the routing path. Wrap the
cable/DMI connection with self-fusing tape to keep dust and moisture out of the
connection.
To install the DMI cable perform the following (Figure 10):
1. Plug DMI power and data cable into socket on DMI encoder.
2. Route cable along length of the restraint rod, secure with tie wraps.
Figure 10: Attach DMI Cable to Restraint Rod
