Read First
!
!
Safety Information
Understand and follow operating instructions carefully.
Use the meter only as specified in this manual; otherwise,
the protection provided by the meter may be impaired.
This identifies hazardous conditions and actions that could
cause BODILY HARM or DEATH. To avoid possible
danger, follow below guidelines.
• If the equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment
may be impaired.
• Always use proper terminals, switch position, and range
for measurements.
• To reduce the risk of fire or electric shock, do not expose
this product to rain or moisture.
• Verify the Meter operation by measuring a known
voltage. If in doubt, have the Meter serviced.
• Do not apply more than the rated voltage, as marked on
meter, between terminals or between any terminal and
earth ground.
• To avoid false readings that can lead to electric shock
and injury, replace battery as soon as low battery
indicator blinks.
• Do not use Meter around explosive gas or vapor.
• When using test leads or probes, keep your fingers
behind the finger guards.
• Remove test lead from Meter before opening the battery
door or Meter case.
• Use caution with voltages above 30 Vac rms, 42 Vac
peak, or 60Vdc. These voltages pose a shock hazard.
• Probe assemblies to be used for MAINS measurements
shall be RATED as appropriate for MEASUREMENT
CATEGORY III OR IV according to IEC 61010-031 and
shall have a voltage RATING of at least the voltage of
the circuit to be measured.
Warning
!
36RIII
EN
1
Summary of Contents for 36RIII
Page 18: ...正面面板圖示 鉗頭 觸發鍵 LCD 顯示螢幕 護手擋板 保留 最大讀值 功能鍵 ZERO A 背光功能 旋轉開關 輸入端子 36RIII TC 17 ...
Page 20: ...量測電阻 調整開關 並按下功能鍵選擇量測功能 調整開關 並按下功能鍵選擇量測功能 量測導通性 二極體 36RIII TC 電阻 電阻 19 ...
Page 32: ...正面面板图示 钳头 触发键 LCD 显示萤幕 护手挡板 保留 最大读值 功能键 ZERO A 背光功能 旋转开关 输入端子 36RIII SC 31 ...
Page 34: ...量测电阻 调整开关 并按下功能键选择量测功能 调整开关 并按下功能键选择量测功能 量测导通性 二极体 电阻 电阻 36RIII SC 33 ...
