The plate-loading window has broken.
Problem
Solution
Check whether the two thumb screws
on the turntable are loose. If so, fasten
the screws.
18
| Temporary solution: The glass window
will usually be broken into several
complete pieces, which can be simply
stuck together with tape first, and then
continue to use.
| Final solution: Replace the plate-
loading window, which will require
disassembling the machine.
There are holes in some wells of the
plate, causing liquid leakage.
| Temporary solution: Users should pay
attention before use. Before adding liquid,
observe whether there are obvious holes at
the bottom of the plate, and observe
whether there is liquid leakage at the bottom
after adding liquid. Discard the leaking
plate, replace the plate and add liquid
again.
| Final solution: Replace with new
consumables.
The rotating sound of the turntable is
noisy and harsh.
The machine turntable is supported by
some nylon balls. If the nylon balls are
not lubricated, it will make a certain
noise. Apply some grease on the
supporting nylon balls to reduce the
noise.
