background image

 

 AWARD BIOS   4-15

To change the password, choose the "

SUPERVISOR PASSWORD or USER PASS-

WORD 

"

 

option from the 

CMOS SETUP UTILITY

 menu and press [Enter].

NOTE

 :  Either "

Setup

" or "

System

" must be selected in the "

Security Option

" of the

BIOS FEATURES SETUP

 menu (Refer to Figure 4-3 for the details).

1. If CMOS is corrupted or the option is not used, a default password  stored in the ROM

will be used. The screen will display the following message:

Enter Password:

Press the [Enter] key to continue after proper password is given.

2. If CMOS is corrupted or the option was used earlier and the user wish to change

default password, the 

SETUP UTILITY

 will display a message and ask for a

confirmation.

Confirm Password:

3. After pressing the [Enter] key (ROM password if the option was not used) or current

password (user-defined password), the user can change the password and store new
one in CMOS RAM. A maximum of 8 characters can be entered.

4-8

CHANGE SUPERVISOR or USER PASSWORD

ROM PCI/ISA BIOS(2A5LDPAB)

CMOS SETUP UTILITY

AWARD SOFTWARE, INC.

Load SETUP Default (Y/N)? 

Y

STANDARD CMOS SETUP

SUPERVISOR PASSWORD

BIOS FEATURES SETUP

USER PASSWORD

CHIPSET FEATURES SETUP

IDE HDD AUTO DETECTION

POWER MANAGEMENT SETUP

HDD LOW LEVEL FORMAT

PNP/PCI  CONFIGURA

                         ETUP

INTEGRATED PERIPH

                         SAVING

LOAD SETUP DEFAULTS

ESC: QUIT

      :SELECT ITEM

F10:Save & Exit Setup                                          (Shift)F2  :Change Color

Load Setup Defaults Except Standard COMS SETUP

Figure 4-8 LOAD SETUP DEFAULT

Summary of Contents for P55KTX












































Reviews: