AWARD BIOS 4-13
IDE Primary Master PIO:
The default value is Auto.
Auto
:
BIOS will automatically detect the Onboard Primary Master PCI
IDE HDD Accessing mode.
Mode0~4
:
Manually set the IDE Accessing mode.
Onboard UART 2:
This field allows the user to sellect the serial port. The default
value is 2F8H/IRQ3.
COM1
:
Enable Onboard Serial port 2 and address is 3F8H/IRQ4.
COM2
:
Enable Onboard Serial port 2 and address is 2F8H/IRQ3.
COM3
:
Enable Onboard Serial port 2 and address is 3E8H/IRQ4.
COM4
:
Enable Onboard Serial port 2 and address is 2E8H/IRQ3.
Disabled
:
Disable Onboard SMC CHIP's Serial port 2.
Onboard UART 1:
This field allows the user to sellect the serial port. The default
value is 3F8H/IRQ4.
COM1
:
Enable Onboard Serial port 1 and address is 3F8H/IRQ4.
COM2
:
Enable Onboard Serial port 1 and address is 2F8H/IRQ3.
COM3
:
Enable Onboard Serial port 1 and address is 3E8H/IRQ4.
COM4
:
Enable Onboard Serial port 1 and address is 2E8H/IRQ3.
Disabled
:
Disable Onboard SMC CHIP's Serial port 1.
IDE Secondary Master PIO:
The default value is Auto.
Auto
:
BIOS will automatically detect the Onboard Secondary Master PCI
IDE HDD Accessing mode.
Mode0~4
:
Manually set the IDE Accessing mode.
IDE Primary Slave PIO:
The default value is Auto.
Auto
:
BIOS will automatically detect the Onboard Primary Slave PCI IDE
HDD Accessing mode.
Mode0~4
:
Manually set the IDE Accessing mode.
IDE Secondary Slave PIO:
The default value is Auto.
Auto
:
BIOS will automatically detect the Onboard Secondary Slave PCI
IDE HDD Accessing mode.
Mode0~4
:
Manually set the IDE Accessing mode.
Onboard FDC Controller:
The default value is Enabled.
Enabled
:
Enable the Onboard SMC CHIP's floppy drive interface controller.
Disabled
:
Disable the Onboard SMC CHIP's floppy drive interface controller,
When using On-card ISA FDC's controller.
