4-8 CHAPTER 4
4-4 POWER MANAGEMENT SETUP
Choose the "
POWER MANAGEMENT SETUP
" in the
CMOS SETUP UTILITY
to display the following screen. This menu allows the user to modify the power
management parameters and IRQ signals. In general, these parameters should not
be changed unless it is absolutely necessary.
Figure 4-5 POWER MANAGEMENT SETUP
ROM PCI/ISA BIOS(2A5LDPAB)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
Again, user can move the cursor by pressing direction keys to the field needed to be
modified and press <PgDn> or <PgUp> to alter item selection. You can only change
the content of
Doze Mode
,
Standby Mode
, and
Suspend Mode
when the
Power
Management
is set to '
User Define
'.
4-4-1 The Description of the Power Management
A. Power Management
mode selection :
Disabled :
The system operates in NORMAL conditions (Non-GREEN)
and the Power Management function is disabled.
Max. saving:
This mode will maximize the power saving capability.
Min. saving:
This mode will minimize the power saving capability.
User define:
Allow user to define time-out parameters to control power saving
mode. Refer to item B shown below.
Esc : Quit : Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F7 : Load Setup Defaults
Power Management
: User Define
** Power Down & Resume Events **
PM Control by APM
: Yes
IRQ5
(LPT 2)
: Primary
Video off Option
: Suspend -> Off
IRQ6
(Floppy Disk)
: Disabled
Video off Method
: V/H SYNC+Blank IRQ7
(LPT 1)
: Primary
Conserve Mode
: Disabled
IRQ8
(RTC Alarm)
: Disabled
Modem Use IRO
: 3
IRQ9
(IRQ2 Redir)
: Primary
** PM Timers **
IRQ10 (Reserved)
: Primary
HDD Power Down
: Disable
IRQ11 (Reserved)
: Primary
Doze Mode
: Disable
IRQ12 (PS/2 Mouse)
: Primary
Suspend Mode
: Disable
IRQ13 (Coprocessor)
: Primary
IRQ14 (Hard Disk)
: Primary
** PM Events **
IRQ15 (Reserved)
: Disabled
VGA
: OFF
LPT & COM
: LPT /COM
HDD & FDD
: OFF
DMA /master
: OFF
Primary INTR
: ON
IRQ3 (COM 2)
: Primary
IRQ4 (COM 1)
: Primary
