6
Mounting Rower Seat and Upper mainframe:
Seat Indentation
To install the rower seat, spread the
Left/Right side rails slightly and drop
the seat into the track.
Note Seat indentation must face
rearward.
Rower Seat
M8x45mm bolt
M8 Washer
M8 Washer
M8 Standard nut
M8 Nylock
nut
Next, install the Main upper frame onto the Side
rail assembly as shown. You will need 8x
M8x45mm bolts, 16x M8 washers, 8x M8 standard
nuts and 8x M8 Nylock nuts.
Secure but do not tighten. You may find that the
lower bracket bolts can be difficult to access. You
can tighten these bolts completely once the rower
is standing in the vertical position so for the
moment, simply align and loosely thread lower
bolts/nuts.
Bolt Assembly Close up
Nylock nuts must
be outside the
standard nut and
washer to proper-
ly secure assem-
bly
Ny
loc
k
Ny
loc
k
Note: Clean wheels and tracks weekly with a soft dry cloth in order to decrease the rate of wear
on both wheels and track.
