4
Apollo Design Technology, Inc.
260.497.9191 •
ApolloDesign.net
To change the lens, loosen the screw on the bottom of the lens housing and
remove. Insert the new lens to a balanced position and tighten the screw on the
bottom of the lens housing. To project a focused image, it is necessary to finely
adjust the focusing lens after the unit has been pointed at the desired projection
surface. To adjust the focusing lens, loosen the screw on the side of the lens
housing and slide the housing along the rails until the image is focused. Secure
the lens housing to the rails by tightening the screw on the side.
Lens Fitting & Focusing
