2
Apollo Design Technology, Inc.
260.497.9191 •
ApolloDesign.net
Safety Instructions
1. Read and understand all instructions before using the equipment.
2. Close supervision is necessary when any fixture is used by, or near,
children.
3. Care must be taken, as burns can occur from touching hot parts.
4. Do not operate fixture with a damaged cord, or if the fixture has been
dropped, or damaged, until it has been examined by a qualified engineer.
5. Position the cord so that it will not be tripped over, pulled, or come into
contact with hot surfaces.
6. If an extension cord is necessary, a cord with a current rating at least equal
to that of the fixture should be used. Cords rated for less amperage than
the fixture may overheat.
7. Always unplug fixture from electrical outlet before cleaning and servicing
and when not in use. Never yank cord to pull plug from outlet. Grasp plug
and pull to disconnect.
8. Let fixture cool completely before packing. Loop cord loosely around
fixture when storing.
9. To reduce risk of electric shock, do not immerse product in water or other
liquids.
10. To reduce the risk of electric shock, do not dismantle this fixture.
11. Do not attempt to service the fixture unless you are qualified and working
under the direction of the manufacturer.
12. The use of an accessory attachment not recommended by the manufacturer
may cause a risk of fire, electric shock, or personal injury.
13. A safety chain or cable must be fitted to the fixture and secured to an
immovable object where applicable. The securing point must be able to
withstand the shock weight of the fixture should it fall.
14. After any maintenance or cleaning all parts must be absolutely dry before
refitting to the fixture.
15. During focusing of the projected image beware of moving the lens
too far, as this may cause the lens to become separated from the fixture,
and perhaps drop and break which may cause injury.
16. Flammable surfaces should be 0.5m away from the front of the fixture.
