GROUNDING INSTRUCTIONS
This product must be properly grounded. In the event of an electrical short
circuit, grounding reduces the risk of electrical shock by providing an alternate
path for the electrical current.
This product is equipped with a cord that has a ground wire and an appropriate ground plug. Plug the unit into an
outlet that is properly installed and grounded in accordance with local codes and ordinances.
IMPROPER INSTALLATION OF THE GROUND PLUG CAN RESULT IN THE RIST OF ELECTRICAL SHOCK. IF
REPAIR OR REPLACEMENT OF THE PLUG OR CORD IS NECESSARY, DO NOT CONNECT THE GROUND
WIRE TO EITHER FLAT BLADE TERMINAL. THE WIRE WITH GREEN INSULATION (WITH OR WITHOUT A
YELLOW STRIPE) IS THE GROUNDING WIRE.
1. For any question regarding proper installation of the ground plug, consult a qualified (licensed or certified)
electrician.
2. Do not modify the plug provided. If the plug does not fit the outlet, have the proper outlet installed by a qualified
electrician.
3. This product is for use on a nominal 120-volt circuit and has a grounding plug that looks like the plug in Figure 2.
Make sure that the product is connected to an outlet having the same configuration as the plug. No adapters
should be used with this product.
4. If an extension cord is required, use only a three wire extension cord that
has the same configuration as the unit cord,
including the (round) ground terminal. Make sure
that the extension cord is plugged into a properly grounded receptacle.
5. When using an extension cord, be sure it is in good condition and heavy enough to meet the
specifications in the chart below. If an extension cord is needed the following wire sizes
must be used.
6. (See Chart 1) Figure 2
25’ cord………………………….10, 12, or 14 Gauge
50’ cord………………………………..10 or 12 Gauge
100’ cord………………………………………10 Gauge
Chart 1 Extension Cord Requirements
