General Safety Information:
Read all instructions and safety precautions before operating the unit.
THIS INDICATES A CONDITION THAT WILL CAUSE SERIOUS INJURY
OR LOSS OF LIFE IF THE WARNING IS IGNORED.
THIS INDICATES A CONDITION THAT COULD CAUSE SERIOUS INJURY
OR LOSS OF LIFE IF THE WARNING IS IGNORED.
THIS INDICATES A CONDITION THAT MAY CAUSE MINOR INJURY
AND/OR EQUIPMENT/PROPERTY DAMAGE.
•
Risk of fire or explosion! Solvent and paint fumes can explode or ignite,
causing severe injury and property damage.
•
Paints and solvents containing HALOGENATED HYDROCARBONS can
react explosively with aluminum. Always check the product’s label before using
these materials in the unit.
•
Hazardous vapors: Paint, solvents, insecticides and other materials may be
harmful if inhaled, causing severe nausea, fainting or poisoning.
•
Make sure the room is well ventilated. Avoid all ignition sources, such as static electricity sparks,
open flames, hot objects, sparks from connecting and disconnecting power cords,
and working light switches.
•
Follow the material and solvent manufacturers’ safety precautions and
warnings. Do not use liquids with flash points less than 100 degrees Fahrenheit (38
degrees Celsius).
•
Static electricity can be produced by HVLP spraying. Make sure any
electrically conductive object being sprayed is grounded to prevent static sparking.
The sprayer is grounded to prevent static sparking. The spray grounded through
the electrical cord. If an extension cord is necessary, the cord must be a grounded with three wires made
for the appropriate voltage used.
•
Use a respirator or mask whenever there is a chance that vapors may be inhaled. Read all
instructions with the mask to ensure that the mask will provide the necessary protection against the
inhalation of harmful vapors.
•
Do not carry the turbine while spraying.
•
Keep the turbine at the maximum distance from the spraying area.
•
Tipping the Mist Applicator™ causes the Mist Applicator™ to clog. Dried
spray material also clogs the pressure delivery tube and fittings. The Mist Applicator™ does not function
when clogging occurs.
•
When not in use, be sure to disconnect the hose and place the Mist Applicator™ into the holder in
the turbine to avoid tipping.
