manualshive.com logo in svg

Apogee Symphony 64, User Manual, Page: 46 / 60

Share
Download
Apogee Symphony 64 User Manual Download Page 46

APOGEE ELECTRONICS

42

Symphony64 PCI card –

 User’s Guide

Working with the Input, Output and Mixer Panes

  While configuration of the Input and Output panes is quite intuitive, there are a few details to be aware of:

 

One Hardware Input, Multiple Software Inputs

 - In the Input pane it is possible to route one hardware 

input to multiple software inputs simply by clicking down the desired hardware input column and across 

the desired software inputs, as shown at right. For the recording situation where one microphone is routed 

to several software tracks (say, when recording backing vocals), the necessary changes are accom-

plished more quickly in the Input routing pane than in your software application.

 

One Software Output, Multiple Hardware Outputs

 - In the Output pane it is possible to route one 

software output to multiple hardware outputs by holding down the 

Control 

key while clicking across the 

desired software output row and under the desired hardware outputs, as shown at right.

  AD-16X (Standard Routing)

 - When an AD-16X in Standard routing mode is selected in the Interface 

menu, the Output pane is blank, reflecting the fact that there are no signal paths from software outputs to 

AD-16X outputs while it is set to Standard routing.

 

DA-16X (Standard Routing)

 - Likewise, when a DA-16X is selected, the Input pane is blank; there are no 

signal paths from DA-16X inputs to software inputs while the interface is set to Standard routing.

 

AD-16X (Advanced Routing)

 - When the AD-16X is set in Advanced routing, the Input pane is used to 

route the AD-16X’s analog inputs to software inputs, and the Output pane is used to route software out-

puts to the AD-16X’s AES and ADAT/SMUX outputs.

 

DA-16X (Advanced Routing)

 - When the DA-16X is set in Advanced routing, the Input pane is used to 

route the DA-16X’s AES 

or

 ADAT/SMUX digital inputs (as selected on the unit’s front panel) to software 

inputs, and the Output pane is used to route software outputs to the DA-16X’s analog outputs.

1

2

Summary of Contents for Symphony 64





























































Reviews:

No comments