16
•
Replacement of cables and sheaves.
•
Replacement or rebuilding air and hydraulic cylinders as required.
•
Replacement or rebuilding pumps / motors as required.
•
Checking of hydraulic cylinder rod and rod end (threads) for deformation or damage.
CAUTION!!
Relocating or changing components may cause problems. Each component in the system must be compatible; an
undersized or restricted line will cause a drop in pressure. All valve, pump, and hose connections should be sealed
and/or capped until just prior to use. Air hoses can be used to clean fittings and other components. However, the air
supply must be filtered and dry to prevent contamination. Most important is cleanliness; Contamination is the most
frequent cause of malfunction or failure of hydraulic equipment.