Aplex VITAM-9 A Series User Manual Download Page 48

Page: 48 / 126

VITAM-9XXA Series User Manual

CN3

：

(1.27mm Pitch 2X30 Pin Header), connect

to SBC-7118 CN2

pin Header.

USB23 (SBC-7114 USB3/USB4)

：

(Double stack USB type A), Rear USB connector, it provides up to 2 USB2.0

ports, speed up to 480Mb/s.

LAN1:

(RJ45 Connector), Rear LAN port, one standard 10/100/1000M RJ-45

Ehternet port is provided. Use Intel I211-AT chipset, LINK LED (green) and ACTIVE

LED (green) respectively located at the left-hand side of the Ethernet port indicate

the activity and transmission state of LAN.

PSE Function support

PSE output voltage

DC44-57V

U2/U7 (option)

：

For onboard POE powered device module.

12V_OUT1

：

Summary of Contents for VITAM-9 A Series































































































































Search results

Summary of Contents for VITAM-9 A Series

Reviews:

Related manuals for VITAM-9 A Series

Brands by name

Popular brands

Aplex VITAM-9 A Series, User Manual

Search results

Summary of Contents for VITAM-9 A Series

Reviews:

Related manuals for VITAM-9 A Series

Brands by name

Popular brands