Aplex OPC-5158, User Manual

Page: 21 / 93

OPC-5XX8(P) Series User Manual 20
SBC-7111 R2.XX POE Module
DC_IN2 TB-528NE1U2POE/12V OUT (30W)
8. BT1/BT2/P_SW1:
Power on/off button , They are used to connect power switch button. The two
pins are disconnected under normal condition. You may short them temporarily
to realize system startup & shutdown or awaken the system from sleep state.
BT2 BT1 P_SW1
● ● ○
Default
● ○ ●
Option
9. FAN1(option):
(2.54mm Pitch 1x3 Pin Header), Fan connector, cooling fans can be connected
directly for use. You may set the rotation condition of cooling fan in menu of
BIOS CMOS Setup.
Pin# Signal Name
1 Ground
2 VCC
3 Rotation detection
Note:
Output power of cooling fan must be limited under 5W.
10. VGA1:
(CRT 2.0mm Pitch 2x6 Pin Header), Video Graphic Array Port, Provide 2x6Pin
cable to VGA Port.
Signal Name Pin# Pin# Signal Name
CRT_RED 1 2 Ground
CRT_GREEN 3 4 Ground
CRT_BLUE 5 6 VGA_EN
CRT_H_SYNC 7 8 CRT_DDCDATA
CRT_V_SYNC 9 10 CRT_DDCCLK
Ground 11 12 Ground