Aplex OPC-5158 User Manual Download Page 40

Page: 40 / 93

OPC-5XX8(P) Series User Manual

LPSS I2C #5 Support

[Enabled]

LPSS I2C #6 Support

[Enabled]

LPSS I2C #7 Support

[Enabled]

NFC

[Disabled]

Touch Pad

[Disabled]

I2C touch Device Address

LPSS HSUART #1 Support

[Disabled]

LPSS HSUART #2 Support

[Disabled]

LPSS PWM #1 Support

[Enabled]

LPSS PWM #2 Support

[Enabled]

LPSS SPI Support

[Enabled]

3.4.12 System Component

3.4.13 Network Stack Configuration

Network Stack [Disabled]

3.4.14 CSM Configuration

CSM Support

[Enabled]

CSM16 Module Version

07.76

GateA20 Active

[Upon Request]

[Always]

Option ROM Messages

[Force BIOS]

[Keep Current]

Boot option filter

[UEFI and Legacy]

[Legacy only]

[UEFI only]

Network

[UEFI]

[Do not launch]

[Legacy]

Storage

[UEFI]

[Do not launch]

[Legacy]

Video

[Legacy]

[UEFI]

Summary of Contents for OPC-5158






























































































Search results

Summary of Contents for OPC-5158

Reviews:

Related manuals for OPC-5158

Brands by name

Popular brands

Aplex OPC-5158, User Manual

Search results

Summary of Contents for OPC-5158

Reviews:

Related manuals for OPC-5158

Brands by name

Popular brands