Aplex APC-3519 User Manual Download Page 31

Page: 31 / 87

39. MIO2:

(DF13-40P Connector),Front panel connector.

Function

Signal Name

Pin#

Signal Name

Function

P_LED+

PWR-LED

HDD_LED

H_LED+

P_LED-

Ground

USB01_OC-

PSON+

MIO_PSON-

USB23_OC-

PSON-

Ground

RESET-

RESET

BUZZER-

BUZZER

GPIO_OUT1

PCH_GPIO68

PCH_GPIO12

GPIO_IN1

GPIO_OUT2

PCH_GPIO69

PCH_GPIO15

GPIO_IN2

GPIO_OUT3

PCH_GPIO70

PCH_GPIO58

GPIO_IN3

GPIO_OUT4

PCH_GPIO71

PCH_GPIO75

GPIO_IN4

PS2_Mouse

5V_S5_USB

Ground

PS2_K/B

PS2_MSDATA

PS2_KBDATA

PS2_MSCLK

PS2_KBCLK

USB3

5V_S5_USB

USB2

USB3_N

USB2_N

USB3_P

USB2_P

Ground

USB1

5V_S5_USB

USB0

USB1_N

USB0_N

USB1_P

USB0_P

Ground

Pin1- Ground:

HDD LED

, They are used to connect hard disk activity LED. The LED

blinks when the hard disk is reading or writing data.

Pin2- Pin4:

POWER LED

, They are used to connect power LED. When the system

is powered on or under S0/S1 state, the LED is normally on, when the system

is under S4/S5 state, the LED is off.

Pin3:

USB01 OC-

“USB01_OC-“ Signal.

Pin5:

USB23 OC-

“USB23_OC-“ Signal.

Pin7- Ground:

RESET Button

, They are used to connect reset button. The two pins

are disconnected under normal condition. You may short them temporarily to

realize system reset.

Pin6- Pin8:

POWER on/off Button

, They are used to connect power switch button.

The two pins are disconnected under normal condition. You may short them

temporarily to realize system startup & shutdown or awaken the system from

sleep state.

Pin9- Pin10:

BUZZER

, They are used to connect an external buzzer.

Summary of Contents for APC-3519
























































































Search results

Summary of Contents for APC-3519

Reviews:

Related manuals for APC-3519

Brands by name

Popular brands

Aplex APC-3519, User Manual

Search results

Summary of Contents for APC-3519

Reviews:

Related manuals for APC-3519

Brands by name

Popular brands