Aplex APC-3517 User Manual Download Page 55

Page: 55 / 110

APC-3xx7 User Manual

USB Configuration

The USB Configuration field shows the system USB configuration. The items listed are: Module

Version: x.xxxxx.xxxxx

USB Devices Enabled

The USB Devices Enabled field lists the USB devices that are enabled on the system

USB Function [Enabled]

Use the USB Function BIOS option to enable or disable the USB function.

Disabled USB function support disabled

Enabled DEFAULT USB function support enabled

Legacy USB Support [Enabled]

Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard support.

Normally if this option is not enabled, any attached USB mouse or USB keyboard does not

become available until a USB compatible operating system is fully booted with all USB drivers

loaded. When this option is enabled, any attached USB mouse or USB keyboard can control the

system even when there is no USB driver loaded onto the system.

Disabled Legacy USB support disabled

Enabled DEFAULT Legacy USB support enabled

Auto Legacy USB support disabled if no USB devices are connected

USB2.0 Controller Mode [HiSpeed]

Use the USB2.0 Controller Mode option to set the speed of the USB2.0 controller.

FullSpeed The controller is capable of operating at 12Mb/s

HiSpeed DEFAULT The controller is capable of operating at 480Mb/s

Hotplug USB FDD Support [Auto]

Use the Hotplug USB FDD Support option to enable or disable USB FDD support.

Disabled Hot-plug USB FDD support disabled.

Enabled DEFAULT A virtual FDD drive is created and will be associated with the hotplugged

FDD later.

Auto A virtual FDD drive is created only if there is no USB FDD present.

3.3.9.1 USB Mass Storage Device Configuration

Use the USB Mass Storage Device Configuration menu (BIOS Menu 13) to configure USB mass

storage class devices.

Summary of Contents for APC-3517















































































































Search results

Summary of Contents for APC-3517

Reviews:

Related manuals for APC-3517

Brands by name

Popular brands

Aplex APC-3517, User Manual

Search results

Summary of Contents for APC-3517

Reviews:

Related manuals for APC-3517

Brands by name

Popular brands