Aplex AEx-2410, User Manual

Page: 21 / 64

AEx-2410 User Manual 19
8. BT1/BT2/P_SW (option):
Power on/off button , They are used to connect power switch button. The two
pins are disconnected under normal condition. You may short them temporarily
to realize system startup & shutdown or awaken the system from sleep state.
Model BT1 BT2 P_SW1
SBC-7111-N2930-4G
● ● ○
SBC-7111-N2930P-4G ● ● ○
SBC-7111-N2930-2G ● ● ○
SBC-7111-N2930-8G
● ● ○
SBC-7111-E3845-4G
● ● ○
SBC-7111-N2930P-CN3V-2G ○ ● ○
SBC-7111-N2930-4G-SW ○ ● ●
9. FAN1(option):
(2.54mm Pitch 1x3 Pin Header), Fan connector, cooling fans can be connected
directly for use. You may set the rotation condition of cooling fan in menu of
BIOS CMOS Setup.
Pin# Signal Name
1 Ground
2 VCC
3 Rotation detection
Note:
Output power of cooling fan must be limited under 5W.
Model FAN1
SBC-7111-N2930-4G ○
SBC-7111-N2930-4G-SW ○
SBC-7111-N2930P-4G
○
SBC-7111-N2930P-CN3V-2G ○
SBC-7111-E3845-4G ○
SBC-7111-N2930-2G ○
SBC-7111-N2930-8G
○
10. VGA1: