Aplex AEx-2410, User Manual

Page: 30 / 64

AEx-2410 User Manual 28
Each USB Type A Receptacle (2 Ports) Current limited value is 2.0A.
If the external USB device current exceeds 2.0A, please separate connectors
into different Receptacle.
34. LAN1/LAN2:
LAN1/LAN2: (RJ45 Connector), Rear LAN port, Two standard 10/100/1000M
RJ-45 Ethernet ports are provided. Used intel 82574L chipset, LINK LED (green)
and ACTIVE LED (yellow) respectively located at the left-hand and right-hand
side of the Ethernet port indicate the activity and transmission state of LAN.
Model RJ45(LAN1) RJ45(LAN2)
SBC-7111-N2930-4G
● ●
SBC-7111-N2930P-4G
● ●
SBC-7111-N2930-2G ● ●
SBC-7111-N2930-8G ● ●
SBC-7111-E3845-4G
● ●
SBC-7111-N2930P-CN3V-2G ● ○
SBC-7111-N2930-4G-SW ● ●
35. BUZ1:
Onboard buzzer.
36. CN2 :
(DF13-30P Connector) For expand output connector, It provides eight GPIO,
one RS422 or RS485, one USB2.0, one Power on/off, one Reset.
Function Signal Name Pin# Pin# Signal Name Function
5V 5V_S5 2 1 5V_S5 5V
SOC_GPIO10 GPIO_IN2 4 3 GPIO_IN1 SOC_SPIO09
SOC_GPIO26 GPIO_IN4 6 5 GPIO_IN3 SOC_GPIO17
SOC_GPIO05 GPIO_OUT2 8 7 GPIO_OUT1 SOC_GPIO04
SOC_GPIO08 GPIO_OUT4 10 9 GPIO_OUT3 SOC_GPIO06
Ground 12 11 Ground