KIT INSTALLATION (P/N 193-8033-2)
The following procedure and Figure 2 provides general installation instructions to
be used as an aid in installing Rack Mounting Kit (P/N 193-8033-2). These pro-
cedures will convert two bench mounted Model 8310s to an assembly that can be
installed easily in any cabinet or rack that is designed according to EIA RS-310 or
MIL-STD-189.
a. Select one of the Model 8310 to be rack mounted and remove screws
attaching bottom cover to the Model 8310 chassis and remove.
Repeat step for top cover.
b. If desired, remove the four plastic feet from bottom cover and
discard. Repeat for other Model 8310.
c. Align side mounting holes of the two Model 8310s and secure with
four flat head screws (2) and washers (4) as shown in Figure 2.
d. Carefully position the Rack Adapter Ear (as shown in Figure 2, item 1)
and secure using the four screws (3). Repeat step for other side.
e. Replace top and bottom cover and secure using previously removed
hardware.
g. Install the Dual Model 8310s into cabinet or rack.
5
Model 8310 Rack Mounting Kits
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
